Category:
C-23
C-23 Citrus-based Liquid Degreaser
About the product
Product Overview
Polymer Nation has created two cleaners for the care and maintenance of our coating systems. Our everyday cleaner is C-22 and our grease and crud-cutting cleaner is our C-23. Both formulas have been tested on our entire coatings line and can be recommended as effective, economical cleaners.
Uses
C-23 is a Citrus-based cleaner designed to cut through grease, soap scum and other hard to remove films.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
Name
C-23
Category
Kit Yield in Gallons
5
Material can be supplied in larger packaging upon request and with minimum quantities
Number of Mixes Per Kit
N/A
Number of Components
1
Mix Ratio Liquids by Volume
N/A
Ideal Application Temperatures
60F-90F
Mixed Viscosity in cP@25C/77F
30
Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time
N/A
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch
N/A
Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry
N/A
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk
N/A
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use
N/A
Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure
N/A
Warmer temperatures will reduce time and colder temperatures will increase time
Shore Hardness at 24 Hours
N/A
Warmer temperatures will increase hardness
Shore Hardness at 7 Days
N/A
Warmer temperatures will shorten time to reach full hardness
Gloss @ 60 Degree Angle
N/A
Applying material close to dew point will decrease gloss and may result in an amine blush
VOC’s of Mixed Material
<0 g/L
EPA Method 24
Color Scale per ASTM D1500
N/A
Clear to slightly amber before colorants are introduced
Solids by Volume Mixed
>15%
Polymer Nation uses the strictest guidelines when determining volume solids of our coatings
Storage
60F-90F
Store material between 60-90 degrees F in a protected dry location.
Odor
Subtle
Measuring odor offensiveness is difficult so experience with chemicals has been consulted here
Application Thickness in Mils
Both cleaners can be used at full strength or diluted 1:1 with water.
Coverage Per Mix
N/A
Disposal
Dispose of material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors
N/A
Mixing & Installation
Both cleaners can be used in a floor scrubbing machine. Dilution may be required to avoid excessive foaming.
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
.png)
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
.jpg)
Product Documentation
PRODUCT PDF.png)
.png)
