SP-16 Aromatic Fast Patch
SP-16 combines a fast setting polyaspartic resin with our aromatic hardener blend to create a rapid pour and patch system.
Overview
SP-16 combines a fast setting polyaspartic resin with our aromatic hardener blend to create a rapid pour and patch system. By incorporating a variety of fillers and aggregates the user can achieve a patching material that is ready for grinding in 30 minutes.
Uses and Benefits
SP-16 is most often used to patch concrete holes, cracks, divots and non-moving joints that will be top coated with a pigmented, UV stable finish coat.
Limitations
SP-16 is not intended as a finish coat as it will amber. Ideal application temperatures to be between 40-100°F. Cooler temperatures will increase cure times. Warmer temperatures will decrease working and cure times.
Preparation
The preparation method for each project is determined by a full understanding of the substrate to be coated, the chemistry of the coating system being used, the coating system thickness, and numerous other factors. The coating installer should fully read and understand ICRI Guideline NO. 310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at Lab@polymerNation.com.
Key Benefits
- Low Odor/VOCs
- Quick Cure
Technical Data
At a glance — the specs most teams decide on.
- Shore Hardness @ 24 Hours
- 65Shore D
- Shore Hardness @ 7 Days
- 80Shore D
- VOCs of Mixed Material
- <100 g/lCalculated
- Color Scale per ASTM D1500
- 0.5-1.0Clear to slightly amber before filler is introduced
- Solids by Volume (Mixed)
- 50%
- Working Time
- 3-4 minutes
- Gel Time
- 4 minutesWarmer temperatures will decrease gel time and lower temperatures will increase gel time
- Dry to Touch
- 10 minutesWarmer temperatures will reduce time and colder temperatures will increase time
- Through Dry
- 30 minutesWarmer temperatures will reduce time and colder temperatures will increase time
- Dry to Walk
- 30 min.Warmer temperatures will reduce time and colder temperatures will increase time
- Dry to Lightly Use
- 30 minutesWarmer temperatures will reduce time and colder temperatures will increase time
- Full Cure
- 2 daysWarmer temperatures will reduce time and colder temperatures will increase time
- Number of Components
- 2
- Mix Ratio (Liquids by Volume)
- 1:1
- Mixed Viscosity @ 25°C/77°F
- 40 cPWarmer temperatures will reduce viscosity and lower temperatures will increase viscosity
- Ideal Application Temperature
- 40-100°F
- Odor
- Solvent
- Storage Temperature
- 60-80 degrees FStore material between 60-90 degrees F in a protected dry location.
- Number of Mixes per Kit
- Variable by Mix SizeMix A and B 1 to 1 by volume, only in quantities that can be applied in 3 to 4 minutes as this material is very fast setting.
Colors & Packaging
Colors
This material is available in clear.
Packaging
- Available sizes
- 2 Gallons
Where It's Used
Markets
Mixing & Application
This material is extremely fast reacting. Only mix what can be poured out in 3-4 minutes from initial mixing. A starting point mixture may consist of 2 FL. OZ. A, 2 FL. OZ. B and 245 grams of aggregate (about 5 FL. OZ.). Aggregate size and the fluidity of the mixed material is based upon user preference and application parameters. Combine 1 part A and 1 part B into a single container, large enough to accept the entire kit. Mix liquids at 200 RPM for 30 seconds using an appropriate mixing blade. Immediately add the aggregate into the mixed resin and agitate for 1 minute.
Disposal: Dispose of material, containers, solvents, etc., per Federal, State and local guideline, rules and laws.
More Patching, Joint, Cove
Related products
Complete the system or compare close alternatives in the same family.
Made in the USA · Tech Support Included
Need SP-16 for your project?
Our team will help you spec the right system, quantities, and colors — and get you a quote fast.