F-41 SLQ Clear UV Resistant 100% Solids Epoxy Quartz Slurry

F-41 SLQ consists of our clear, UV resistant epoxy and proprietary ultra-fine color quartz blends to create a 1/8" decorative floor finish. This mixture allows the installer to blend 8 custom colors to create a unique floor finish. When PN 1321 Glint is added to the mix, the finish comes alive with light reflectivity. The cured material has high compressive strength (three times that of concrete), great impact resistance and can be finish-coated with various epoxy and polyaspartic topcoats.

Uses and Benefits

F-41 SLQ is primarily used to create an inexpensive, decorative and durable floor finish. With the appropriate conditions and a skilled installer, it can be installed in 2 days after preparation.

Limitations

Each mix of F-41 SLQ will cover 80 sq. ft. at 1/8" theoretical coverage. A waste factor of 10% should be contemplated. Ideal application temperatures to be between 60-90°F. Cooler temperatures will increase cure times. Warmer temperatures will decrease working and cure times. Verify that substrate temperature is above 5 degrees of dewpoint during application and cure of material to avoid a potential amine blush.

Preparation

The preparation method for each project is determined by a full understanding of the substrate to be coated, the chemistry of the coating system being used, the coating system thickness, and numerous other factors. The coating installer should fully read and understand ICRI Guideline NO. 310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at Lab@polymerNation.com.