F-41 TDQ Clear UV Resistant Epoxy Quartz Trowel Down

F-41 TDQ combines our low viscosity, nonylphenol-free, clear, UV resistant epoxy resin, our UV resistant, cycloaliphatic amine curing agent and our Quartz Trowel Down Aggregate (PN 1321 L) to create the easiest troweling material available anywhere. This combination achieves an easily closed, decorative, epoxy mortar that can be walked on within a few hours. The cured material has high compressive strength (three times that of concrete), great impact resistance, excellent UV resistance and a broad range of resistance to chemical attack. It is virtually odor-free.

Uses and Benefits

F-41 TDQ is primarily used as a decorative, epoxy overlay to protect and/or repair concrete. Because it is a mortar, it is the ideal material for sloping floors and creating ramps and transitions. It can also be troweled vertically by skilled technicians to make cove base and stunning wall finishes.

Limitations

Each mix of F-41 TDQ will cover 28 sq. ft. at 1/4" theoretical coverage. A waste factor of 10-15% should be contemplated. Ideal application temperatures to be between 60-90°F. Cooler temperatures will increase cure times. Warmer temperatures will decrease working and cure times. Verify that substrate temperature is above 5 degrees of dewpoint during application and cure of material to avoid a potential amine blush.

Preparation

The preparation method for each project is determined by a full understanding of the substrate to be coated, the chemistry of the coating system being used, the coating system thickness, and numerous other factors. The coating installer should fully read and understand ICRI Guideline NO. 310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at Lab@polymerNation.com.