C-20

C-20 Sheen Reducer

C-20

Product Overview

Polymer Nation has created a product to replace the need to manufacture multiple sheen level Urespartic™ products. This product is a proprietary mixtures that allows the formulations to be applied at lower wet film thicknesses to create mid and low level gloss finishes.

Uses

C-20 is used to reduce the sheen level of our U-20 and U-21 Urespartic™ materials. When adding C-20 to the mixture per the spreadsheet below the finish sheen can be lowered to a variety of sheen levels.

Preparation

The preparation method for each project is determined by a full understanding of the substrate to be coated, the chemistry of the coating system being used, the coating system thickness, and numerous other factors. The coating installer should fully read and understand ICRI Guideline NO.03732 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at lab@polymernation.com.

The data below represents the most pertinent information needed by a professional installer to understand and efficiently install this material. The data was gathered at temperatures of 72-75 F and 30-50% RH. A wide array of independent and company test data has been compiled on this product but is too large to place on this Technical Data Sheet. Please direct inquiries for detailed test reports on this product to lab@polymernation.com.

C-20

3 Gal Mix of U-20
C-20 Sheen Reducer
ADD in Fl Oz Applied WFT Sq. Ft. Per Gal Expected Sheen @ 60˚ Angle
0 5 to 7 229 – 320 Gloss
64 4.5 to 6 267 – 356 Satin
128 3.5 to 4.5 356 – 458 Low Luster
3 Gal Mix of U-21
C-20 Sheen Reducer
ADD in Fl Oz Applied WFT Sq. Ft. Per Gal Expected Sheen @ 60˚ Angle
0 5 to 6 267 – 320 Gloss
64 4 to 5 320 – 401 Satin
128 2.5 to 3.5 458 – 641 Low Luster

Have a Question?
Need a Quote?
Drop Us a Note!