Category:
Epoxies
F-00
F-00 Pigmented Epoxy Floor Coating
About the product
Product Overview
F-00 consist of a low viscosity, nonylphenol-free, TIO2-filled, epoxy resin (E1W) with our robust modified cycloaliphatic amine reactant (H1). This combination achieves a high-hiding, pigmented epoxy with good flow and leveling, characteristics. The cured material has good broad-range chemical resistance as well as good abrasion and impact resistance.
Uses
F-00 is most often used as a pigmented broadcast resin and topcoat for resinous concrete flooring projects but it also performs well as a slower curing pigmented primer, and as a slower setting patching material when combined with PN 1324 or PN1329 aggregate.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
For the most up-to-date product details, please view the Product Spec PDF below
PRODUCT PDFName
F-00
Category
Epoxies
Kit Yield in Gallons
3, 15, 165 Gallons
Special packaging is available based on size of order and time constraints
Number of Mixes Per Kit
N/A
N/A
Number of Components
2
N/A
Mix Ratio Liquids by Volume
2:1
It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures
60-85° F
Verify that substrate temperature is above 5 degrees of dewpoint during application and cure of material to avoid a potential amine blush
Mixed Viscosity in cP@25C/77F
500-600 cP
Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time
45/30/15 min.
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch
4/3/2 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry
8-10 hrs/4-5 hrs
Standard Set/Fast Set
Dry to Walk
12/8/6 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use
16-24 hrs/4-8 hrs
Standard Set/Fast Set
Full Cure
7 Days
Warmer temperatures will reduce time and colder temperatures will increase time
Shore Hardness at 24 Hours
65/75
Standard Set/Fast Set (Shore D)
Shore Hardness at 7 Days
75-80
Standard and Fast Set (Shore D)
Gloss @ 60 Degree Angle
90+
Applying material close to dew point will decrease gloss and may result in an amine blush
VOC’s of Mixed Material
Near Zero; <50 g/L
EPA Method 24
Color Scale per ASTM D1500
.5-1.0
Clear to slightly amber before colorants are introduced
Solids by Volume Mixed
100%
N/A
Storage
60F-90F
Store material between 60-90 degrees F in a protected dry location.
Odor
Subtle
Measuring odor offensiveness is difficult so experience with chemicals has been consulted here
Application Thickness in Mils
8-20 mils
N/A
Coverage Per Mix
80-200 sq.ft./gal.
Disposal
Dispose of material, containers, solvents, etc. per Federal, State and local guideline, rules and laws
N/A
Available Colors
White, Light Gray, Medium Gray, Warm Sun
Contact Polymer Nation for specialty colors
Mixing & Installation
See Technical Data Sheet or contact your local Polymer Nation Distributor
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
.png)
.png)
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
Product Documentation
PRODUCT PDF.png)
.png)
