Category:
Urethane Concrete
F-52 AD
F-52 D ALIPHATIC URETHANE CONCRETE DRESSING
About the product
Product Overview
F-52 AD is a proprietary formula on that allows longer working me with a snap-cure. It combines our water-based urethane resin and aliphatic hardener with our proprietary blend of portland cement, lime and fillers (PN 1352 D). It has been formulated to work with our TD and SL systems to provide the highest degree of impact, UV resistance, and thermal shock resistance of any urethane concrete on the market. It’s low odor and easy application make it perfect for industrial and durable decorative applications.
Uses
F-52 AD is most o en used as a topcoat for our TD and SL systems. It's low viscosity and tenacious bond to concrete make it an excellent prime/build coat for many decorative and industrial applications. F-52 AD can also be used as a primer when concrete floors exhibit high moisture transmission levels and can be applied to green concrete.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
For the most up-to-date product details, please view the Product Spec PDF below
PRODUCT PDFName
F-52 AD
Category
Urethane Concrete
Packaging
2 Gallons + 12.5 lbs. Aggregate
1, 262 Gallon kits
Number of Mixes Per Kit
Mix: Part A - 1 gal, Part B - 1 gal, Part C - 12.5 lbs Aggregate
Number of Components
3
Mix Ratio Liquids by Volume
1:1
Accuracy when mixing kits from bulk containers is critical. For mix ratio by weight contact Lab@polymerNation.com.
Ideal Application Temperatures
60-85°F
Mixed Viscosity in cP@25C/77F
400-600 cP
Liquids only
Working Time
10-15 min
Gel Time
N/A
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch
2-4 hours
Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry
4-6 hours
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk
6-10 hours
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use
16-24 hrs
Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure
7 Days
Warmer temperatures will reduce time and colder temperatures will increase time
Shore Hardness at 24 Hours
70
Shore D
Shore Hardness at 7 Days
75-80
Shore D
Gloss @ 60 Degree Angle
30-50
VOC’s of Mixed Material
Near Zero; <50 g/L
EPA Method 24
Color Scale per ASTM D1500
N/A
Milky appearance when mixed before colorants are introduced
Solids by Volume Mixed
100%
Storage
Odor
Subtle
Application Thickness in Mils
25 mils
Coverage Per Mix
160 sq.ft./kit
Disposal
Dispose of material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors
Natural, Tile Red, Light Gray, Medium Gray, Dark Gray, Tan, Black
Natural (PN 1342 WB Color Packs)
Mixing & Installation
See Technical Data Sheet or contact your local Polymer Nation Distributor
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
Product Documentation
PRODUCT PDF.png)
.png)
