Category:
Urethanes
U-30
U-30 Urespartic™ Pigmented Hybrid WB - Satin
.png)
-p-130x130q80%20(1).jpg)
About the product
Product Overview
U-30 is a breakthrough technology combining urethane and polyaspartic polyols to create our state-of-the-art Urespartic™. By combining our Urespartic™ polyol with our proprietary Iso blend we are able to create a high-solids, pigmented finish that will not yellow, maintains its established sheen and passes 2500 MEK double rubs! It is manufactured in a gloss but the sheen can be reduced using PN C-20 Sheen Reducer.
Uses
U-30 Urespartic™ is primarily used as a pigmented topcoat due to its unsurpassed UV, mar and abrasion resistance. It can be applied to floors and walls and adheres well to many substrates including concrete, gypsum, cement board, metals, vinyl, PVC and fiberglass. It can also be applied direct to concrete as a primer and topcoat.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
For the most up-to-date product details, please view the Product Spec PDF below
PRODUCT PDFName
U-30
Category
Urethanes
Kit Yield in Gallons
2.5,5,&25 Gallons
Special packaging is available based on size of order and time constraints
Number of Mixes Per Kit
N/A
Number of Components
2
Mix Ratio Liquids by Volume
4:1
It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures
60-85°F
Verify that substrate temperature is above 5 degrees of dew-point during application and cure of material to avoid a potential amine blush
Mixed Viscosity in cP@25C/77F
250-500 cP
Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time
.75 Hours
Dry to Touch
3 Hours
Warmer temperatures will reduce time and colder temperatures will increase time. Higher RH will lengthen Dry time data
Through Dry
6-10 hrs
Warmer temperatures will reduce time and colder temperatures will increase time. Higher RH will lengthen Dry time data
Dry to Walk
12 Hours
Warmer temperatures will reduce time and colder temperatures will increase time. Higher RH will lengthen Dry time data
Dry to Lightly Use
16-24 hrs
Warmer temperatures will reduce time and colder temperatures will increase time. Higher RH will lengthen Dry time data
Full Cure
7 Days
Warmer temperatures will reduce time and colder temperatures will increase time. Higher RH will lengthen Dry time data
Shore Hardness at 24 Hours
12
Pendulum Hardness (Konig)
Shore Hardness at 7 Days
46
Pendulum Hardness (Konig)
Gloss @ 60 Degree Angle
30-60
VOC’s of Mixed Material
Near zero; <50 g/L
EPA Method 24
Color Scale per ASTM D1500
N/A
Solids by Volume Mixed
58%
Storage
60F-90F
Store material between 60-90 degrees F in a protected dry location.
Odor
None
Application Thickness in Mils
4-6 mils
Coverage Per Mix
275-400 sq.ft./gal
Disposal
Dispose of material, containers, solvents, etc., per Federal, State and local guideline, rules and laws
Available Colors
White, Light Gray, Medium Gray, Warm Sun
Contact Polymer Nation for specialty colors
Mixing & Installation
See Technical Data Sheet or contact your local Polymer Nation Distributor
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
Product Documentation
PRODUCT PDF.png)
.png)
