Category:
SP-61
SP-61 Slow Speed 100% Solids Clear Polyaspartic
About the product
Product Overview
SP-61 combines our robust, clear polyaspartic resin with our proprietary Iso blend to create the highest quality, polyaspartic available anywhere. SP-61 is a 100% solids, low viscosity polyaspartic that provides amazing working time and delivers unmatched performance. The UV and abrasion resistance (.027g loss per ASTM 4060) is world-class.
Uses
SP-61 is primarily used as a clear topcoat due to its unsurpassed UV and abrasion resistance. It can be applied to floors and walls and adheres well to many substrates including concrete, gypsum, cement board, metals and fiberglass.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
Name
SP-61
Category
Kit Yield in Gallons
2, 10
Special packaging is available based on size of order and time constraints
Number of Mixes Per Kit
N/A
Number of Components
2
Mix Ratio Liquids by Volume
1:1
It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures
70F-80F 40-60% RH
Applying this material in colder temperatures requires great care to avoid puddling in excess of 15 mils. Use C-99 to thin this material below 70. Film formation in excess of 15 mils may foam.
Mixed Viscosity in cP@25C/77F
550-650
Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time
N/A
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch
3 hours
Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry
11 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk
12 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use
24 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure
7 Days
Warmer temperatures will reduce time and colder temperatures will increase time
Shore Hardness at 24 Hours
12
Warmer temperatures will increase hardness
Shore Hardness at 7 Days
50
Warmer temperatures will shorten time to reach full hardness
Gloss @ 60 Degree Angle
90+
VOC’s of Mixed Material
<50g/L
EPA Method 24
Color Scale per ASTM D1500
0.5
Clear
Solids by Volume Mixed
95%
Storage
60F-90F
Store material between 60-90 degrees F in a protected dry location.
Odor
Very Subtle
Application Thickness in Mils
As a floor topcoat 6-12 (125-260 sq ft gal). As a wall topcoat 4-6 (260-400 sq ft gal).
Coverage Per Mix
N/A
Disposal
Dispose of material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors
Clear and Color Packs
Mixing & Installation
Combine all of part A and B into a single container, large enough to accept the entire kit. Mix at 350 RPM for 2-3 minutes using an appropriate mixing blade and making sure not to introduce excessive air into the solution. Pour the entire content from the container onto the floor and follow normal squeegee and back roll or cut and roller techniques. Recoat within 24 hours. Clean tools with a solvent similar to Xylene or Acetone. Material can be reduced using PN C-99 and accelerated with PN C-55.
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
.png)
.png)
.png)
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
.jpg)
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
Product Documentation
PRODUCT PDF.png)
.png)
