Category:
Polyurea and Polyaspartics
SP-71
SP-71 Medium Speed 100% Solids Clear Polyaspartic
About the product
Product Overview
SP-71 is a solvent-free polyaspartic that combines a blend of proprietary polyols with our Iso to create a medium speed, high-build, clear polyaspartic. SP-71 is a 100% solids, low viscosity polyaspartic that provides the skilled installer with a medium working time- fast dry time material that will not yellow or chalk.
Uses
SP-71 is primarily used as a clear topcoat due to its unsurpassed UV and abrasion resistance. It can be applied to floors and walls and adheres well to many substrates including concrete, gypsum, cement board, metals and fiberglass.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
For the most up-to-date product details, please view the Product Spec PDF below
PRODUCT PDFName
SP-71
Category
Polyurea and Polyaspartics
Packaging
2,10 Gallons
Special packaging is available based on size of order and time constraints
Number of Mixes Per Kit
N/A
Number of Components
2
Mix Ratio Liquids by Volume
1:1
It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures
60-85°F
Applying this material in colder temperatures requires great care to avoid puddling in excess of 15 mils. Use C-99 to thin this material below 70. Film formation in excess of 15 mils may foam.
Mixed Viscosity in cP@25C/77F
500-650 cP
Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Working Time
10-15 min
Gel Time
N/A
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch
1-2 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry
6-8 hrs
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk
12 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use
12-16 hrs
Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure
7 Days
Warmer temperatures will reduce time and colder temperatures will increase time
Shore Hardness at 24 Hours
20
Pendulum Hardness (Konig)
Shore Hardness at 7 Days
50
Pendulum Hardness (Konig)
Gloss @ 60 Degree Angle
90+
VOC’s of Mixed Material
<50g/L
EPA Method 24
Color Scale per ASTM D1500
N/A
Clear
Solids by Volume Mixed
>96%
Storage
60F-90F
Store material between 60-90 degrees F in a protected dry location.
Odor
Very Subtle
Application Thickness in Mils
5-12 mils
Coverage Per Mix
135-300 sq.ft./gal
Disposal
Dispose of material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors
Clear and Color Packs
Mixing & Installation
See Technical Data Sheet or contact your local Polymer Nation Distributor
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
.png)
.png)
.png)
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
.jpg)
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
Product Documentation
PRODUCT PDF.png)
.png)
