Category:
SP-16
SP-16 Aromatic Fast Patch
About the product
Product Overview
SP-16 combines a fast setting polyaspartic with our aromatic Iso blend to create a rapid pour and patch system. By incorporating a variety of fillers and aggregates the user can achieve a patching material that is ready for grinding in 30 minutes.
Uses
SP-16 is most often used to patch concrete holes, cracks, divots and non-moving joints that will be topcoated with a pigmented, UV stable finish coat.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
Name
SP-16
Category
Kit Yield in Gallons
N/A
Number of Mixes Per Kit
Variable by Mix Size
Mix A and B 1 to 1 by volume, only in quantities that can be applied in 3 to 4 minutes as this material is very fast setting.
Number of Components
2
Mix Ratio Liquids by Volume
1:1 by Volume
Ideal Application Temperatures
40F-100F
Mixed Viscosity in cP@25C/77F
40cps
Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time
4 min.
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch
8-10 min.
Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry
30 min.
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk
30 min.
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use
30 min.
Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure
2 Days
Warmer temperatures will reduce time and colder temperatures will increase time
Shore Hardness at 24 Hours
D65
Warmer temperatures will increase hardness
Shore Hardness at 7 Days
D81
Warmer temperatures will shorten time to reach full hardness
Gloss @ 60 Degree Angle
N/A
VOC’s of Mixed Material
<100g/L
EPA Method 24
Color Scale per ASTM D1500
.5-1.0
Clear to slightly amber before filler is introduced
Solids by Volume Mixed
50%
Storage
60F-90F
Store material between 60-90 degrees F in a protected dry location.
Odor
Solvent
Application Thickness in Mils
N/A
Coverage Per Mix
N/A
Disposal
Dispose of material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors
This material is available in clear.
Mixing & Installation
This material is extremely fast reacting. Only mix what can be poured out in 3-4 minutes from initial mixing. A starting point mixture may consist of 2 FL. OZ. A, 2 FL. OZ. B and 245 grams of aggregate (about 5 FL. OZ.). Aggregate size and the fluidity of the mixed material is based upon user preference and application parameters. Combine 1 part A and 1 part B into a single container, large enough to accept the entire kit. Mix liquids at 200 RPM for 30 seconds using an appropriate mixing blade. Immediately add the aggregate into the mixed resin and agitate for 1 minute. Immediately pour the entire mixed content from the container into the area to be filled. Patch should be ground prior to the application of additional coatings. Clean tools with a solvent similar to Xylene or Acetone.
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
.png)
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
Product Documentation
PRODUCT PDF.png)
.png)
