Category:
Epoxies
P-01
P-01 Clear Epoxy Floor Primer
About the product
Product Overview
P-01 is our 3 to 1 workhorse, clear, 100% solids epoxy primer. P-01 can be used with our full line of colorants (PN 1339) to provide extreme color flexibility*. Ease of use, good flow and leveling, and flexibility are characteristics of this high quality epoxy. The cured material has good, broad-range, chemical resistance as well as good abrasion and impact resistance.
*Hiding power reduced when used in 3:1 material versus the standard 2:1 F-01. For high hiding workhorse epoxy try our Pre-Pigmented 3:1 Epoxy, P-00!
Uses
P-01 is most often used as a primer or broadcast base for resinous concrete flooring projects.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
For the most up-to-date product details, please view the Product Spec PDF below
PRODUCT PDFName
P-01
Category
Epoxies
Kit Yield in Gallons
4,20,& 220 Gallons
Additional lead time required for 20 gal and 220 gal units.
Number of Mixes Per Kit
N/A
N/A
Number of Components
2
Mix Ratio Liquids by Volume
3:1
It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures
60-85°F
Verify that substrate temperature is above 5 degrees of dewpoint during application and cure of material to avoid a potential amine blush
Mixed Viscosity in cP@25C/77F
400-600 cP
Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time
30 min.
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch
3 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry
8-12 hrs
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk
12 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use
18-24 hrs
Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure
7 Days
Warmer temperatures will reduce time and colder temperatures will increase time
Shore Hardness at 24 Hours
65
Shore D
Shore Hardness at 7 Days
80
Shore D
Gloss @ 60 Degree Angle
90+
Applying material close to dew point will decrease gloss and may result in an amine blush
VOC’s of Mixed Material
Near Zero; <50 g/L
EPA Method 24
Color Scale per ASTM D1500
.5-1.0
Clear to slightly amber before colorants are introduced
Solids by Volume Mixed
100%
Storage
60F-90F
Store material between 60-90 degrees F in a protected dry location.
Odor
Subtle
Measuring odor offensiveness is difficult so experience with chemicals has been consulted here
Application Thickness in Mils
8-12 mils
Coverage Per Mix
135-200 sq.ft./gal
Disposal
Dispose of material, containers, solvents, etc. per Federal, State and local guideline, rules and laws
Available Colors
Clear and Color Packs
Mixing & Installation
See Technical Data Sheet or contact your local Polymer Nation Distributor
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
.png)
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
Product Documentation
PRODUCT PDF.png)
.png)
