Category:
Polyurea and Polyaspartics
F-81 LV
F-81 LV Fast Speed Clear Polyaspartic
.png)
About the product
Product Overview
F-81 LV combines our fast polyaspartic (P2) with our proprietary Iso blend (Iso2) to create a fast speed, clear polyaspartic. F-81 LV is a 83% solids, low viscosity polyaspartic that provides the skilled installer with a short working time- fast dry time material that will allow for multiple steps to be completed in one day.
Uses
F-81 LV is primarily used as a 1 day floor system. It can go direct to concrete as a primer and broadcast resin and be ready for recoat within 2 hours. It has excellent UV, abrasion and hot tire resistance.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
For the most up-to-date product details, please view the Product Spec PDF below
PRODUCT PDFName
F-81 LV
Category
Polyurea and Polyaspartics
Kit Yield in Gallons
3,15,& 165 Gallons
Special packaging is available based on size of order and time constraints
Number of Mixes Per Kit
N/a
Number of Components
2
Mix Ratio Liquids by Volume
2:1
It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures
60-85°F
Mixed Viscosity in cP@25C/77F
200-300 cP
Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time
N/A
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch
1 hours
Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry
1-2 hrs
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk
5 Hours
Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use
8-12 hrs
Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure
7 Days
Warmer temperatures will reduce time and colder temperatures will increase time
Shore Hardness at 24 Hours
20
Pendulum Hardness (Konig)
Shore Hardness at 7 Days
50
Pendulum Hardness (Konig)
Gloss @ 60 Degree Angle
90+
VOC’s of Mixed Material
165 g/L
Calculated
Color Scale per ASTM D1500
N/A
Clear
Solids by Volume Mixed
83%
Storage
60F-90F
Store material between 60-90 degrees F in a protected dry location.
Odor
Very Subtle
Application Thickness in Mils
5-15 mils
Coverage Per Mix
110-300 sq.ft./gal
Disposal
Dispose of material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors
Clear and Safety Colors
Mixing & Installation
See Technical Data Sheet or contact your local Polymer Nation Distributor
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
Product Documentation
PRODUCT PDF.png)
.png)
