Category:
Polyurea and Polyaspartics
F-61 LV
F-61 AD Standard Speed Clear Polyaspartic
.png)
About the product
Product Overview
F-61 AD combines a proprietary blend of polyol with Iso to create an intermediate speed, clear polyaspartic. F-61 is an 83% solids, low viscosity polyaspartic that provides easy application with a moderately fast dry time. It will not yellow or chalk over time and provides a great, high gloss finish with as little as 6 mils WFT.
Uses
F-61 AD is primarily used as a clear topcoat due to its unsurpassed UV and abrasion resistance. It can be applied to floors and walls and adheres well to many substrates including concrete, gypsum, cement board, metals and fiberglass.
Preparation
The coating installer should fully read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at techservice@polymernation.com
Product Details
For the most up-to-date product details, please view the Product Spec PDF below
PRODUCT PDFName
F-61 LV
Category
Polyurea and Polyaspartics
Kit Yield in Gallons
3,15,& 165 Gallons
Special packaging is available based on size of order and time constraints
Number of Mixes Per Kit
N/A
N/A
Number of Components
2
N/A
Mix Ratio Liquids by Volume
2:1
It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures
60-85°F
N/A
Mixed Viscosity in cP@25C/77F
200-300 cP
Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time
N/A
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch
4-5 Hours
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Through Dry
8-12 hrs
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Walk
14 Hours
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Lightly Use
18-24 hrs
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Full Cure
7 Days
Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Shore Hardness at 24 Hours
18
Pendulum Hardness (Konig)
Shore Hardness at 7 Days
50
Pendulum Hardness (Konig)
Gloss @ 60 Degree Angle
90+
VOC’s of Mixed Material
165 g/L
Calculated
Color Scale per ASTM D1500
N/A
Solids by Volume Mixed
83%
Storage
60F-90F
Store material between 60-90 degrees F in a protected dry location.
Odor
Very Subtle
N/A
Application Thickness in Mils
5-15 mils
N/A
Coverage Per Mix
110-300 sq.ft./gal
Disposal
Dispose of material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
N/A
Available Colors
Clear and Color Packs
N/A
Mixing & Installation
See Technical Data Sheet or contact your local Polymer Nation Distributor
Other Product Names
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.
Product HIghlights
Exceptional Performance, Durability, and Safety in Every Application
Most commonly Serviced Markets
Although most our products can be used on any market, we see some common trends between certain products and certain markets.
Available Colors
If you don't see a color you like here, some custom colors can be available upon request. Please contact us for more details!
Product Documentation
PRODUCT PDF.png)
.png)
