U-35

Product Overview

U-35 is a non-yellowing, one-component, water-based acrylic urethane sealer with excellent wear and abrasion resistanceU-35 is an alipha c, non-yellowing, one-component, water-based acrylic urethane sealer with excellent wear and abrasion resistance proper es. It provides excellent protection against moisture penetration. U-35 has virtually no odor, and its VOC content is less than 50 g/L. Because it is a fast drying characteristic, multiple coats can be applied in a short amount of time.

Uses and Benefits

U-35 is used as a clear sealer over flake floor systems. This mid coat helps lock the flake in and readily accepts common topcoats such as PN F-61/71/81 or PN U-51. Due to its excellent wear and abrasion resistance, U-35 can also be applied over concrete or cementitious surfaces. A minimum of two coats is recommended for complete sealing of the substrate. Its low to zero odor makes U-35 an easy choice for indoor applications when sealing concrete and cementitious surfaces.

‍

Before starting preparatory work, the coating installer should thoroughly read and understand ICRI310.2R-2013 and OSHA 29 CFR 1926.1153. Preparing a substrate for coating applications aims to roughen the surface, remove weak layers, contaminants, dirt, debris, and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed, contact Polymer Nation at techservice@polymernation.com